Home>Products>Sealed spherical roller bearings continuous casting plants>56208 Rolling Mills BEARINGS FOR METRIC AND INCH SHAFT SIZES
56208 Rolling Mills BEARINGS FOR METRIC AND INCH SHAFT SIZES
category
Sealed spherical roller bearings continuous casting plants
Rolling Mills 56208 Bearing SPECIFICATIONS
- Rolling Mills
56208
- 475
- 480
- Imperial
- Stamped Steel
- 56100 lbf
- 14600 lbf
- 2.6875 in
- 1.1420 in
- ELO Hydraulic Valve Components Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
56208 Rolling Mills BEARINGS FOR METRIC AND INCH SHAFT SIZES Product description
- 475
- 480
- Imperial
- Stamped Steel
- 56100 lbf
- 14600 lbf
- 2.6875 in
- 1.1420 in
- 0.14 in
- 2.95 in
- 3.23 in
- 0.12 in
- 0.04 in
- -0.16 in
- 8360 lbf
- 32200 lbf
- 41900 lbf
- 5500 lbf
- 1.52
- 77.2
- 23
- 0.108
Rolling Mills 56208 56208 Rolling Mills BEARINGS FOR METRIC AND INCH SHAFT SIZES Products and services
Design Units | Imperial |
Cup Part Number | 14274A |
Series | 14000 |
C - Cup Width | 15.875 mm |
d | 31.750 mm |
R - Cone Backface To Clear Radius1 | 0.760 mm |
e - ISO Factor8 | 0.38 |
r - Cup Backface To Clear Radius2 | 3.30 mm |
Cage Type | Stamped Steel |
B - Cone Width | 19.583 mm |
D | 68.956 mm |
C1 - Dynamic Radial Rating (1 million revolutions)5 | 12300 lbf |
Cg - Geometry Factor | 0.0668 |
B | 19.845 mm |
K - Factor7 | 1.53 |
Y - ISO Factor9 | 1.57 |
Cone Part Number | 14124 |
da - Cone Frontface Backing Diameter | 38.61 mm |
G1 - Heat Generation Factor (Roller-Raceway) | 18 |
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 2080 lbf |
Try different search 56208 Rolling Mills BEARINGS FOR METRIC AND INCH SHAFT SIZES | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | Weight | Inventory | Manufacturer Name | Minimum Buy Quantity | ||||
56208 | FAG BEARING | 0 | 0.0 | SCHAEFFLER GROUP | N/A |
546335 FAG Cylindrical Roller Bearings | B:14 mm; Fillet Radius/Chamfer:1 mm; Limiting Speed - Oil:14,000 rpm; Enclosure:Open; Radial Clearance:0.015 to 0.033 mm; ra (max):1 mm; da (min):40 mm; d:35 mm; D:62 mm; Limiting Speed - Grease:12,000 rpm; Configuration:Single Row; Factor fo:14.8; Static Load Rating:10,300 N; Da (max):57 mm; Bore T |
514445B FAG Cylindrical Roller Bearings | Width (mm):25,4; Weight:0,135 Kg; C:25,4 mm; C2:2,8 mm; Bearing number:BAM 3616; Basic static load rating (C0):85,7 kN; Bore Diameter (mm):57,15; Fw:57,15 mm; Basic dynamic load rating (C):39,3 kN; Size (mm):57.15x66.675x25.4; D:66,675 mm; Outer Diameter (mm):66,675; |
541646 FAG Cylindrical Roller Bearings | Weight:17.50 lb; Taper:1:12; Threads No. per Inch:8; Major Dia - B:7.331 in; A:6.713 in; d:5.906 in; G:0.945 in; L:5.748 in; F:0.178 in; |
523399 FAG Cylindrical Roller Bearings | (Grease) Lubrication Speed:4800 r/min; D:80,167 mm; Outer Diameter (mm):80,167; B:25,4 mm; Basic dynamic load rating (C):75,8 kN; Width (mm):25,4; d:41,275 mm; Size (mm):41.275x80.167x25.4; Bearing number:26882/26820; a:7,4 mm; T:25,4 mm; C:19,05 mm; Basic static load rating (C0):89,2 kN; Bore Diame |
567725A FAG Cylindrical Roller Bearings | db (min):78.5 mm; Static Load Rating:151,000 N; Da (max):116.5 mm; D:125 mm; Radial Clearance:0.040 to 0.075 mm; ra (max):1.5 mm; ra1 (max):1.5 mm; Weight:1.520 kg; dd (min):92 mm; r1:1.5 mm; Bore Type:Cylindrical Bore; db (max):82 mm; dc (min):86 mm; Configuration:Single Row; Fillet Radius/Chamfer: |
533023 FAG Cylindrical Roller Bearings | Width (mm):13; Cr:13000 N / Dynamic lo; Outer Diameter (mm):80; Da:75,5 mm / Tolerance:; nG Fett:30000 1/min / Limiti; D:80 mm; Size (mm):55x80x13; C0r:6000 N / Static load; Bore Diameter (mm):55; rmin:1 mm; a:16 mm; B:13 mm; α:15 ° / Angle; da:60 mm / Tolerance: h; ra max:0,6 mm; d:55 mm; |
530488 FAG Cylindrical Roller Bearings | Ew:29 mm; Size (mm):22x29x16; Fw:22 mm; Bearing number:KZK22X29X16; Bore Diameter (mm):22; Width (mm):16; B:16 mm; Outer Diameter (mm):29; |
513378A FAG Cylindrical Roller Bearings | Housing Width:0.75 Inch | 19.05 Mi; Noun:Bearing; Material - Liner:Not Applicable; Mass plain bearing:0.12 kg; r1 min.:0.3 mm; Material - Outer Member:Steel; Overall Width:0.875 Inch | 22.225; Design (sliding contact surface combination):Steel/steel; Minimum Buy Quantity:N/A; inner ring material:Chr |
56208 Rolling Mills BEARINGS FOR METRIC AND INCH SHAFT SIZES Video
Rolling Mills 56208 INTERCHANGE
Sealed spherical roller bearings continuous casting plants Part series 56208 is a potential replacement for these common bearing part numbers:
56208
56208
56208
56208
56208
56208
56208
56208
Contact Us
- ELO Hydraulic Valve Components Co., Ltd.
- AddressRoute cotiere 111, Quartier industriel, Polygone 3, Casablanca, Morocco
- Phone(Working Time)
- Fax
Rolling Mills 56208 Technical Articles
Can a hydraulic pump be rebuilt? |
Does a pump increase temperature? |
How much does it cost to replace a hydraulic pump? |
Sealed spherical roller bearings continuous casting plants CATEGORIES
- Rexroth check valve
- Rexroth Vane pump
- Danfoss Shut-off valves
- Rexroth Solenoid directional valve
- Rexroth PRESSURE RELIEF VALVE
- DENISON vane pump
- Yuken pressure valve
- Yuken Double Vane pump
- Yuken single Vane pump
- PAKER Piston Pump
- Yuken Piston pump
- Rexroth Piston Pump
- Rexroth THROTTLE VALVE
- BOSCH injector
- DENSON injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
- JAPAN NSK Bearing
- THK Linear Guide
- THK Miniature Linear Guide
- THK Linear Guide Rails
- High Temperature Linear Guide
- Curved Linear Guide
- THK Linear Bearings And Rails
- THK Linear Motion
- Large Slewing Bearings
- Slewing Ring Bearings
- Bearing Slewing Ring
- Kaydon Slewing Bearing
- Deep Groove Ball Bearings
- Sealed spherical roller bearings continuous casting plants
- Spherical roller bearings
- Wide Series Cylindrical Roller Bearings
- Double-row Angular Contact Ball Bearings