Rexroth MG20G1X/V THROTTLE VALVE

Nut for removal:HM 30/1000; A:15 mm; B1:355 mm; d1:900 mm; G1:55 mm; B2:375 mm; d:950 mm; Mass withdrawal sleeve:285 kg; G:Tr 1000x8; G2:G 1/4;

Stabilizing ring:SR-22-19; P150°:50.7 kN; H1:125.425 mm; R1:67.866 mm; Pa:17.3 kN; Max. speed for PosiTrac Plus seal:1450 r/min; J min.:320.675 mm; Cap bolt:2 x 3/4-10 UNC; J1:69.85 mm; A2:165.1 mm;

d1:79.2 mm; Static axial stiffness, preload class C:348 N/µm; Calculation factor e:0.68; Calculation factor (single, tandem) X2:0.41; Number of balls z:24; Preload class C GC:800 N; C2:3.5 mm; Calculation factor (single, tandem) Y2:0.87; C3:2.8 mm; Preload class B GB:400 N;

Limiting speed:2600 r/min; Dw:10 mm; D:125 mm; Basic static load rating C0:800 kN; Roller and cage thrust assembly:K 89314 TN; Shaft washer:WS 89314; d:70 mm; Eb:123 mm; Ea:76 mm; Reference speed:1300 r/min;

da min.:472 mm; ra max.:5 mm; B:44 mm; Minimum axial load factor A:16; d:260 mm; r1,2 min.:6 mm; Mass bearing:114 kg; Limiting speed:630 r/min; Reference speed:300 r/min; Basic dynamic load rating C:2850 kN;

Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:25000 N; d:60.000 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:6700 rpm; D:95.0000 mm; Sealed Speed Rating n3:4300 rpm; B:18.00 mm; Basic Dynamic Radial Load Rating

Dynamic (Ca):17.4 kN; d:30 mm; D:49.2 mm; B:12 mm; Pu:1.282 kN; Static (Coa):28.2 kN; Grease:4 200 min-1; Oil:0 min-1;

Design variant/feature:TQON/GW; r1,2 min.:2 mm; Mass bearing:250 kg; Thrust factor K:2.03; d:475 mm; D1 ≈:554 mm; d1 ≈:500 mm; r3,4 min.:6 mm; Comparative radial load rating CF:1400 kN; Basic static load rating C0:16600 kN;

B:16 mm; Basic dynamic load rating C:83 kN; l1 min.:43 mm; Basic static load rating C0:51 kN; h:78 mm; dk:29 mm; C1 max.:13.5 mm; α:9 °; l2 max.:107 mm; Mass rod end:0.32 kg;

D:90.0000 mm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:9000 rpm; Oil Speed Rating n2:9000 rpm; Basic Static Radial Load Rating Co:24000 N; Fillet Radius ra:1.50 mm; B:23.00 mm; Grease Speed Rating n1:7500 rpm; Basic Dynamic Radial Load Rating C:41000 N; Sealed Speed Rating

d2:130 mm; B:58 mm; Dynamic (Ca):619 kN; b:14 mm; E:mm; rs (min):4 mm; s:2.9 mm; Static (Coa):694 kN; Pu:68.240 kN; r1s (min):4 mm;

Misalignment factor k1:0.091; d:45 mm; Basic dynamic load rating C:132 kN; Operating clearance factor k2:0.113; Mass bearing:0.53 kg; Fatigue load limit Pu:23.6 kN; s2 max.:6.4 mm; da min.:48.2 mm; d2 ≈:52 mm; r1,2 min.:0.6 mm;

Specific dynamic load factor K:120 N/mm²; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2.5 m/s; B:100 mm; Coefficient of friction µ min.:0.02; H:3.06 mm; Specific static load factor K0:250 N/mm²; Coefficient of friction µ max.:0.2; L:500 mm; Ma

Reference speed:70000 r/min; Da max.:24 mm; Basic dynamic load rating C:4.75 kN; d1 ≈:14.8 mm; D1 ≈:21.2 mm; Mass bearing:0.018 kg; ra max.:0.3 mm; Limiting speed:45000 r/min; d:10 mm; Basic static load rating C0:1.96 kN;

dk:105 mm; B:55 mm; G:M 64x4; w:90 mm; Material constant KM:330; r1 min.:1 mm; Basic dynamic load rating C:400 kN; d2 max.:182 mm; h1:230 mm; α:5 °;